Skip to content
WattCost

Waterco Turboflo 1.0HP running cost

About $682.63 a year in New South Wales (Ausgrid) at 33.14c/kWh, from its official Energy Rating (AU/NZ) figure. Change the area or usage below.

Registry
Energy Rating (AU/NZ)
Efficiency
1star
Energy
2,060 kWh/yr

Running a Waterco Turboflo 1.0HP pool pump in New South Wales (Ausgrid) costs 31.1c per hour

Cost per hour: 31.1cper hour

at 33.14c/kWh · Australian Energy Regulator

per day
$1.87
per week
$13.08
per month
$56.89
per year
$682.63
over 5 years
$3,413.15
over 10 years
$6,826.30
Energy / year
2,060 kWh

How we calculated it

940 W × 6 h × 33.14c/kWh = $1.87 a day

Energy figure from the official registry record.

Standing charge of $607.15 a year is paid regardless of use and isn't included.

Your usage
Your area and price

Optional: copy the unit rate from your bill (tax included) to replace the published price.

Spec sheet

Official figures

Waterco Turboflo 1.0HP

Official figures · Energy Rating (AU/NZ)

1star
Annual energy consumption
1,226.6 kWh/year
On-mode power
940 W
Capacity / size
940 W
Test standard
AS/NZS (Energy Rating label)
Markets
AU
Pump Type
Single speed
Energy Rating stars
1
Registration number
APP0070
Label daily run time (h)
3.7
Weighted Energy Factor
14.9

View the official Energy Rating (AU/NZ) record ↗Record TURBOFLO10HP

Sources

Data source and date

Electricity price

33.14c/kWh

AER Default Market Offer (flat rate) · New South Wales (Ausgrid) · 1 July 2026 – 30 June 2027

Includes taxes.

Caps are the maximum a retailer can charge on the standing offer; market offers are often cheaper.

Australian Energy Regulator ↗ · retrieved 22 October 2026

Energy figure

Energy Rating (AU/NZ) record TURBOFLO10HP ↗ · AS/NZS (Energy Rating label) · retrieved October 23, 2026. Figures come from standardised tests; your use may differ — adjust the calculator.

Data as of October 22, 2026. Estimates, not a bill. WattCost is independent and not affiliated with any government, registry or utility.

Alternatives

Cheaper to run: similar pool pumps

Same market and similar size (±20–25% capacity), with a lower official energy figure.

By region

Running cost across Australia

Default usage (2,060 kWh a year), priced at each state's latest published household price.
statePricePer monthPer year
Victoria — CitiPower25.96c/kWh$44.56$534.78
Victoria — United Energy27.35c/kWh$46.95$563.41
Victoria — Jemena27.47c/kWh$47.16$565.88
Tasmania27.95c/kWh$47.99$575.85
Queensland — Energex (South East Queensland)27.97c/kWh$48.02$576.28
Victoria — Powercor28.22c/kWh$48.44$581.33
Northern Territory31.68c/kWh$54.38$652.59
Victoria — AusNet Services31.98c/kWh$54.90$658.79
New South Wales — Ausgrid33.14c/kWh$56.89$682.63
Western Australia33.26c/kWh$57.10$685.20
New South Wales — Endeavour Energy33.73c/kWh$57.90$694.79
New South Wales — Essential Energy35.01c/kWh$60.09$721.11
Australian Capital Territory36.95c/kWh$63.44$761.25
South Australia — SA Power Networks41.91c/kWh$71.95$863.36

FAQ

Questions

How much does the Waterco Turboflo 1.0HP cost to run?

About $682.63 a year ($56.89 a month) at 33.14c/kWh in New South Wales (Ausgrid), using its official Energy Rating (AU/NZ) figure and default usage.

Where does the energy figure come from?

From the Energy Rating (AU/NZ) record TURBOFLO10HP, measured under AS/NZS (Energy Rating label). Real-world use depends on how you use the appliance.

Is there a cheaper-to-run alternative?

Yes — for example the Klorman Watertech WT75-S costs about $551.91 a year under the same assumptions.