Skip to content
WattCost

Cost to run an immersion heater in Queensland

83.9c per hour at 27.97c/kWh — July 2026 Australian Energy Regulator prices. Change the hours, tariff or area below.

Price
27.97c/kWh
Period
July 2026
Source
Australian Energy Regulator
Figure
Typical model

Running an immersion heater in Queensland (Energex (South East Queensland)) costs 83.9c per hour

Cost per hour: 83.9cper hour

at 27.97c/kWh · Australian Energy Regulator

per day
$1.26
per week
$8.81
per month
$38.32
per year
$459.79
over 5 years
$2,298.97
over 10 years
$4,597.94
Energy / year
1,644 kWh

How we calculated it

3,000 W × 1.5 h × 27.97c/kWh = $1.26 a day

Category estimate — enter your appliance's rating for an exact figure.

Standing charge of $701.34 a year is paid regardless of use and isn't included.

Your usage

On the rating plate or in the manual.

Your area and price

Optional: copy the unit rate from your bill (tax included) to replace the published price.

Sources

Where these numbers come from

Electricity price

27.97c/kWh

AER Default Market Offer (flat rate) · Queensland (Energex (South East Queensland)) · 1 July 2026 – 30 June 2027

Includes taxes.

Caps are the maximum a retailer can charge on the standing offer; market offers are often cheaper.

Australian Energy Regulator ↗ · retrieved 22 October 2026

Data as of October 22, 2026. Estimates, not a bill. WattCost is independent and not affiliated with any government, registry or utility.

Appliance figure

3,000 W typical rating. Source: Centre for Sustainable Energy, “How much electricity am I using?” (reviewed July 2026). This is a category estimate, not a specific model — choose a model below or enter your appliance's rating for an exact figure.

Compare areas

Immersion heater running cost by state in Australia

Same immersion heater and usage, priced at each state's latest published household rate.
Immersion heater running cost by state in Australia
  1. Victoria — CitiPower77.9c$426.69/yr
  2. Victoria — United Energy82.1c$449.53/yr
  3. Victoria — Jemena82.4c$451.50/yr
  4. Tasmania83.9c$459.46/yr
  5. Queensland — Energex (South East Queensland)83.9c$459.79/yr
  6. Western Australia99.8c$546.70/yr
  7. New South Wales — Endeavour Energy$1.01$554.35/yr
  8. New South Wales — Essential Energy$1.05$575.36/yr
  9. Australian Capital Territory$1.11$607.38/yr
  10. South Australia — SA Power Networks$1.26$688.85/yr
Show all 14
  1. Victoria — CitiPower77.9c$426.69/yr
  2. Victoria — United Energy82.1c$449.53/yr
  3. Victoria — Jemena82.4c$451.50/yr
  4. Tasmania83.9c$459.46/yr
  5. Queensland — Energex (South East Queensland)83.9c$459.79/yr
  6. Victoria — Powercor84.7c$463.83/yr
  7. Northern Territory95.0c$520.68/yr
  8. Victoria — AusNet Services95.9c$525.63/yr
  9. New South Wales — Ausgrid99.4c$544.65/yr
  10. Western Australia99.8c$546.70/yr
  11. New South Wales — Endeavour Energy$1.01$554.35/yr
  12. New South Wales — Essential Energy$1.05$575.36/yr
  13. Australian Capital Territory$1.11$607.38/yr
  14. South Australia — SA Power Networks$1.26$688.85/yr

Guidance

Running an immersion heater for less

Typical use: 1.5 hours a day to reheat a tank.
  1. 1

    Use a timer and insulate the tank with an 80 mm jacket.

FAQ

Questions

How much does it cost to run an immersion heater in Queensland?

At 27.97c/kWh (AER Default Market Offer (flat rate), July 2026), a typical immersion heater costs 83.9c per hour, about $38.32 a month and $459.79 a year with 1.5 hours a day to reheat a tank.

How many kWh does an immersion heater use?

3,000 W typical rating. Under the default usage that is about 1,644 kWh a year. Your appliance's rating plate or energy label gives its exact figure — enter it in the calculator.

Where is it cheapest to run an immersion heater in Australia?

Victoria — CitiPower is cheapest (77.9c per hour) and South Australia — SA Power Networks the most expensive ($1.26), based on the latest published household prices.

Does this include the standing charge?

No. Standing or fixed daily charges are paid whether or not you run the appliance, so they are shown separately in the calculator rather than added to its running cost.